Quantcast Proper GPU temperature for M4400? and how to downclock?

Closed Thread
Results 1 to 4 of 4
  1. #1
    Newbie
    Join Date
    Dec 2008
    Posts
    5
    Rep Power
    14

    Default Proper GPU temperature for M4400? and how to downclock?

    Hi, I bought a M4400 with 770M and WUXGA from Dell Outlet a week ago for $730 after 20% discount coupon including tax. (I'm writing the price just in case people are curious...)

    I was playing a game for 20 minutes. The fan started running louder then few minutes later the laptop rebooted. After the reboot, my system froze at the start up, at which point I had to hard reboot.

    This happened once. I am going to test it tonight if this happens every time I play a 3D game.

    Before I go check if my laptop is a total failure, I wanted to ask if anyone has experienced the same problem.

    My bios is A11 and when I ran the game for 10 minutes, I observed the GPU temperature goes up to 75 Celsius degree using GPU-Z.

    Oh, and, I read there is an automatic downclock issue with 770M. At which temperature does that happen?


    On totally different subject, does anyone know how to downclock the GPU? My game is not a high-end game. I am pretty sure 770M can handle it with half the clock or so. But when I run the game, 770M goes up to full clock making the fan run louder. I installed RivaTuner, but I could not find the downclock option. I suspect it may have something to do with the fact that I am using the quadro driver from Dell website.

    So.. any idea on who to deliberately downclock the GPU?


    Thanks.

  2. #2
    Notebook Deity
    Join Date
    Sep 2008
    Location
    Amsterdam, The Netherlands
    Posts
    1,794
    Rep Power
    22

    Default Re: Proper GPU temperature for M4400? and how to downclock?

    Download nVidia system tools. Go to the performance settings, agree with the disclaimer and you can set the clock lower or higher as you want.

    When i experienced downclocking (in BIOS A06 and onwards) it happened at 105celsius, which seems to be the actual safety limit from nVidia (read that at some point) Later BIOS versions seem to downclock even earlier in the 90's area

    My advice, as always, stick with BIOS A02 or A03, downloads are here http://ftp1.us.dell.com/bios/
    Precision M4400 T9600 / 4gb / Quadro FX770m / WUXGA 2CCFL / Win7 64bit
    Latitude E6400 P8600 / 4gb / Quadro NVS / WXGA+ WLED / Win7 64bit

  3. #3
    Notebook Savant
    Join Date
    Aug 2007
    Location
    ~/FL/orlando
    Posts
    5,189
    Rep Power
    39

    Default Re: Proper GPU temperature for M4400? and how to downclock?

    No, that's not normal behavior...where are you located? what OS are you using? I'd call DELL Support and get it handled if any of that happens again.

    ps: quadro driver is funky for gaming I think, although I don't experience any unnecessary down throttling for what I do. My machine stays incredibly cool, much cooler than my other three laptops...1 acer and 2 asus's.
    DΞLL Precision M6700 "Big Dog": //W8P x64/Scientific Linux 6 x64
    DΞLL Vostro 3350 "Nirvana" : //W8Px64 (work;gaming)
    Scientificlinuxforum.org

  4. #4
    Notebook Enthusiast
    Join Date
    Jan 2009
    Posts
    31
    Rep Power
    14

    Default Re: Proper GPU temperature for M4400? and how to downclock?

    I don't think you should need to down clock a 770m. You should be able to run that at stock speeds without an issue. I know people are having problems with the 1700m running hot but has anyone had this issue with a 770m?

    Have you tried updating the graphics card driver. Dell released a new driver yesterday.

    Also make sure that the air vents are free of obstructions when you are gaming. When I am running very demanding applications I like to prop the back of my laptop up a little so that the air can circulate a under the laptop better or use a laptop cooler.

    I would not down clock the performance will suffer. If new drivers don't help I would contact Dell. You should be able to run this from Dell as is without this type of issue.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 09:56 PM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.1