[GUIDE] UX32VD - How to install Windows 7 on the integrated 32GB SSD

[MDAcompact]

I dont seem to have the fan issue on my UX32vd, I installed a samsung ssd and upgraded the ram with the patriot 8b cl11. If I converte the on board issd so I can youse it will it at all mess witht he fan issue since it does some rapid start with that HD. Also, how cam I check if the ram is running at 1600mhz?

Hi Bro,
can u share me where u buy the Patriot 8Gb CL11?
Actually, i just found this link for 4Gb CL11, so appreciate if u can share...
Newegg.com - G.SKILL 4GB 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model F3-12800CL11S-4GBSQ

Tks Bro!

[MDAcompact]

Btw, can anyone help me check if which one from the list on below store can well support for our UX32VD with CL11 DDhttp://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100006742%20600213066&IsNodeId=1&Description=DDR3%201600&name=8GB&Order=BESTMATCH

Tks!

[Heinzi]

Thank you for the great guide! Although my UX32VD has only the 24GB iSSD, I installed the OS on it. Now I have about 5GB left and a very fast system. But I have one problem: Following the guide I installed all drivers. Everything works ok except for one thing: My FN+F2 does not what it should do. It activates and deactivates Bluetooth immediately, but deactivates WLAN only after a restart. Once deactivated, I can not activate it using FN+F2. I have to use Windows 7 Pro troubleshouting, which says the internal switch is not activated. It activates it an then I can use WLAN normally. When I uninstall ATK Package, I can activate and deactivate WLAN and Bluetooth. But then all the other functions and OSD does not work. Has anyone experienced similar problems?

Uh, one more thing: I installed Wireless Console 3, but the latest version did not install and the version before did show some different OSD, but made no change to the behavior explained before. So I uninstalled it.

[Heinzi]

I have to add one more thing: I was not able to install the Intel WLAN driver from the toplevel exe. It says no suitable hardware found. I were only able to install the drivers and the tools using the separate installers in the two subfolders.

[Pettza78]

Thank you for the great guide! Although my UX32VD has only the 24GB iSSD, I installed the OS on it. Now I have about 5GB left and a very fast system. But I have one problem: Following the guide I installed all drivers. Everything works ok except for one thing: My FN+F2 does not what it should do. It activates and deactivates Bluetooth immediately, but deactivates WLAN only after a restart. Once deactivated, I can not activate it using FN+F2. I have to use Windows 7 Pro troubleshouting, which says the internal switch is not activated. It activates it an then I can use WLAN normally. When I uninstall ATK Package, I can activate and deactivate WLAN and Bluetooth. But then all the other functions and OSD does not work. Has anyone experienced similar problems?

Uh, one more thing: I installed Wireless Console 3, but the latest version did not install and the version before did show some different OSD, but made no change to the behavior explained before. So I uninstalled it.

Intel Wifi drivers installed with setup.exe from the Install subdir, followed by ATK drivers followed by Wireless Console 3 is what is needed to get the fn+F2 function to work if I recall correctly.

[Heinzi]

Intel Wifi drivers installed with setup.exe from the Install subdir, followed by ATK drivers followed by Wireless Console 3 is what is needed to get the fn+F2 function to work if I recall correctly.

Thanks. I tried, but I am not able to install the latest Wireless Console. The installer says "installation process was interrupted, please try again" after rolling back the installation progress bar.

[Heinzi]

I even tried to install Wireless Console 3 before installing ATK Package, but had the same results.

[SnuRRe]

30GB is way to small for me, i can reinstall on the regular drive, right?

Also, is there a way to disable the touchpad button touch functions?

Forget it, i'm returning this garbage.

1. Yes.
2. Yes.

That's too bad. Mine is perfect.

Are you sure the touch function can be disabled on the buttons?
I can't find anything about it anywhere.
I keep touching the buttons with one hand, while moving around on the touchpad with the other hand. And it counts as multitouch and does random things...

If you know how, it would be great if you can tell me

-Morten

[Pettza78]

I'm not sure what you mean by touch function on buttons but if you mean disable the touchpad using the keyboard then you press fn+f9.

[Pettza78]

Thanks. I tried, but I am not able to install the latest Wireless Console. The installer says "installation process was interrupted, please try again" after rolling back the installation progress bar.

I'm using the 3.0.27 version, try to get a hold of that one.