Rückenmark´s VBios

[Rückenmark]

removed old link

[mite_jan]

yep no lockups this time looks like it is working perfect
100/150 0.9V

i think i am not going to like those quick noticable changes on the screen when the memory is changed (watching youtube)
if it will get me more baterry i am going to use it

[Rückenmark]

it does

[CrappyAlloy]

...well I know my GPU isnt the best overclocker out there, but ive yet to see someone underclock/undervolt like mine, just went 100/100 @.7v lol

@Ruckenmark, have your tried .6v yet?

EDIT: now running at 100/100 @.6v and holding strong yay

[Chastity]

For funzies, I made a modded beta vBIOS with the following:

00: 700/1000 @ 1.15v (High Performance AC)
01: 400/500 @ 0.90v (Standard AC)
02: 400/500 @ 0.90v (UVD)
03: 100/150 @ 0.85v (Battery Savings Idle)
04: 300/400 @ 0.90v (Battery Saving Performance)

& Overdrive enabled

MD5 Checksum: 2B388F65A64C58622BEAD76D340F26F8
SHA-1 Checksum: 85939D8287CE8E4C29B46B6BBF3F981C7A00A6B0

File here

[mite_jan]

baterry mode shows me 2:46 hrs defnitelly an improvement
but i am going to stay with gary's vbios and keep the 1000 mhz on memory becouse i don't want ( don't know the real word for that)
but makes my screen shake when changing memory clock ...especially when watching videos on youtube

so the only thing i will change is baterry insted running on 300/1000 to 100/150

cheers for the longer baterry life


one more question
do you think 100/150 at 0.8V will give me more baterry then 0.9V ?

[Chastity]

This is why I try and match UVD with other modes, to minimize screen flicker

[mite_jan]

This is why I try and match UVD with other modes, to minimize screen flicker

chastity this is my suggestion
you've modified garry's vbios and changed baterry to 250/500 and unlocked overdrive
well instead of that it would be better to make a version same like that but instead of 250/500 put 100/150 that would be a perfect vbios at the moment for me
and also a little decrease in voltage if it is possible(i had lockups going from 350/1000 0.9v to 175/250 0.8v
so 0.8v is unstable probably ...don't know about 0.85 if it makes difference

but right now it is working at 100/150 at 0.9V without problems

[Chastity]

if you read my post (#55) you would see the new vBIOS has 100/150 @ 0.85v and 300/400 @ 0.90v for battery performance

also, p4gh reports 3 hr 4 min @ 94% battery

[mite_jan]

baterry saving performance is activating when i am on baterry and start a game? or else?

chasity i've tried your vbios you've posted right now and you know what happened
at this stage 01: 400/500 @ 0.90v (Standard AC)
first started flickering at startup ...probably normal becouse it's changing clocks
after giving me the desktop when i tried to refresh icons at every refresh started flickering
not only refreshing the desktop also working some regular stuff...
i've tried to go in baterry mode unpliging the cable and it didn't flickered...
so i thought it was the clocks 400/500 and i've opened gpu tool to change them and even when i set them on 400/500 it didn't flickered
but when i pressed restore defaults started flickering again... probably the clocks are not too good for my card

right now i am using those clocks i mentioned that were perfect for me

so i can say i am pretty happy with the baterry saving i got

GARY'S VBIOS + 100/150 0.85V BATERRY CLOCK + OVERDRIVE = MORE BATERRY + SMILE ON MY FACE

thanks for everyone helping
my laptop couldn't be this much good if i didn't knew about this forum