M17x graphic cards questions

[snakeye408]

i just open occt doing stress test but some reason it only shown 1 graphic card instead of 2(yes sli r on) but CPUID shown 2 graphic cards ,when i run the test the 2nd card run hotter then the fisrt...pls some1 care to explain?

[DJ_Pawel]

if you use the Auto-Install version of OCCT uninstall it and download the ZIP File, extract it and run it again.
(That worked for my M17x)

[Explosivpotato]

Sounds like you're only loading one card, try DJ's advice.

[snakeye408]

so its occt not graphic cards problem right? i always thuoght 1 of the card might be dead

[Explosivpotato]

You'd know if one card was dead. It certainly wouldn't show up in hardware monitor, and it's questionable if the computer would even boot.

[DR650SE]

Isn't one GPU the master and the other the slave so it's normal for one to run slightly hotter then the other? I guess it depends on how big the differance is.

[snakeye408]

Isn't one GPU the master and the other the slave so it's normal for one to run slightly hotter then the other? I guess it depends on how big the differance is.

yea i understand that ,but arent the master suppose to get hotter then the slave..?but instead my slve card get hotter then the master by more than 10 degree..

[benthedogtrainer]

sounds like driver issue

[snakeye408]

so wat u suggest...?

[benthedogtrainer]

i would go thru the web site and download off of the correct ones...and see what happens then........