Quantcast Command center update

Closed Thread
Page 1 of 18 1234511 ... LastLast
Results 1 to 10 of 171
  1. #1
    Notebook Evangelist
    Join Date
    Jul 2008
    Posts
    313
    Rep Power
    17

    Default Command Center Update

    I just went to AW and there is a Command center update.
    With new Sense and touch options.
    Sense looks like a face recognition program.
    and
    Touch is a touch pad controlling thing.


    64bit users see FindVikas X64 thread

    Install .Net framework 3.5 before updating CC.
    It can be updated by running Command Center. When it opens CC will prompt for a update.


    The Command Center update package can be found here

    If you are having a problem when after it downloads from CC, it goes away and when you run CC update again it gives you a error message.
    Here is what to do.
    1) turn on View Hidden files, via control pannel/folder options.
    2) navigate to c:User/"youaccount"/AppData/Local/Temp
    3) locate & Run - CommandCenterSetup application
    4) This will make a new folder in Temp file called "IXP000.TMP"
    5) open that folder.
    6) Run Command Center 1.28SP1
    7) setup should run and install the new command center as well as a firmware update which is for the webcam.
    ^^no longer needed. ^^


    Found it in my hive!!!!!!
    It is under: AREA-51 M15X 15" WXGA+ W/CAM SIL-RIP-PNT R1
    it calls it "Alienware Command Center v1.0.24.0M" But will download the 1.28sp1.

    32bit users:
    http://support.alienware.com/Support...r_1028_SP1.exe
    ^should install with out the need of the Guide.

    The webcam Driver update for Sense can be found on My hive as well. Called "M15x Webcam 30625". It says to install this before the CC update.
    http://support.alienware.com/Support...m15x_30625.EXE
    Last edited by dwend; 21st October 2008 at 10:55 PM.
    Area-51 M15X: T8100: 8800GTX: 4GB Ram: 120 GB HD


  2. #2
    cha
    cha is offline
    Notebook Deity
    Join Date
    Jun 2008
    Location
    Philippines
    Posts
    764
    Rep Power
    19

    Default Re: Command center update

    Yeah I did update it by simply running command center.

    But before the update could finish, an error message popped up saying that Microsoft.net framework 3.5 needs to be installed.

    I download and install Microsoft.net framework 3.5 successfully, but now Command Center is nowhere to be found.

    Do I just download Command Center from MyHive again?

  3. #3
    Notebook Evangelist
    Join Date
    Jul 2008
    Posts
    313
    Rep Power
    17

    Default Re: Command center update

    Yah, I have the same problem, I did what you sugested, DL from my hive and install, its upgrading again now. Now I am have trouble with the update installing.
    Area-51 M15X: T8100: 8800GTX: 4GB Ram: 120 GB HD


  4. #4
    Notebook Guru
    Join Date
    Jul 2008
    Posts
    69
    Rep Power
    16

    Default Re: Command center update

    Quote Originally Posted by cha View Post
    Yeah I did update it by simply running command center.

    But before the update could finish, an error message popped up saying that Microsoft.net framework 3.5 needs to be installed.

    I download and install Microsoft.net framework 3.5 successfully, but now Command Center is nowhere to be found.

    Do I just download Command Center from MyHive again?
    Yes just download the new version of command center at your myhive and just run it. You dont have to uninstall anything coz in the middle of the update before the error message popped out about framework, it already uninstall the prev. version of command center.

    Make sure to install Microsoft.net framework 3.5 before installing it though.
    Razer Blade 14: i7 Core i7-4702HQ | GTX 765M (2GB GDDR5) / Intel HD4600 | 8GB DDR3L 1600Mhz | 256GB SSD
    Alienware M15x: Cosmic Black | GTX 260M | i7 720QM | (900p) WLED | 8GB DDR3 1333Mhz | 256GB SSD
    Macbook Pro 13 Early 2011: 2.3 GHz Core i5 | Intel HD Graphics 3000 | 4GB DD3 1333Mhz | 128GB SSD

  5. #5
    cha
    cha is offline
    Notebook Deity
    Join Date
    Jun 2008
    Location
    Philippines
    Posts
    764
    Rep Power
    19

    Default Re: Command center update

    Oh, thanks for that drew. I thought I did something wrong

  6. #6
    Notebook Guru
    Join Date
    Mar 2008
    Posts
    68
    Rep Power
    17

    Default Re: Command center update

    when i start updating ,the download bar stops in the end ,and keeps there forever.
    note: i am using vista ult. x64 (findvikas guide)
    AW m15x | 2.8Ghz intel extreme | nvidia 8800m GTX 512mb | 4gb corsair | 3Dmark06=10444 | Vista Ultimate x64

  7. #7
    Notebook Evangelist
    Join Date
    Jul 2008
    Posts
    313
    Rep Power
    17

    Default Re: Command center update

    Well The file is over 80mb, It seems that it is actually downloading it then, so if you have a slow connection it might take awile, mine did take over 7 min.

    Just finished updating and wow the touch controls are amazing now, I have scrolling!!!!!

    If you are having a problem when after it downloads it goes away and when you run CC update again it gives you a error message.
    Here is what to do.
    1) turn on View Hidden files, via control pannel/folder options.
    2) navigate to c:User/"youaccount"/AppData/Local/Temp
    3) locate & Run - CommandCenterSetup application
    4) This will make a new folder in Temp file called "IXP000.TMP"
    5) open that folder.
    6) Run Command Center 1.28SP1
    7) setup should run and install the new command center as well as a firmware update which is for the webcam.
    Last edited by dwend; 21st October 2008 at 02:38 AM.
    Area-51 M15X: T8100: 8800GTX: 4GB Ram: 120 GB HD


  8. #8
    cha
    cha is offline
    Notebook Deity
    Join Date
    Jun 2008
    Location
    Philippines
    Posts
    764
    Rep Power
    19

    Default Re: Command center update

    Hoo boy, I downloaded the command center for mobile from www.alienware.co.uk. The download went on successfully, but upon running the installer I get this error

    Error reading setup initialization file.

    Is there any other place where I can download this file? Anyone downloaded and ran this program successfully from www.alienware.co.uk?

  9. #9
    Notebook Evangelist
    Join Date
    Jul 2008
    Posts
    313
    Rep Power
    17

    Default Re: Command center update

    Try my little guide, I was having that exact same problem.
    If you are having a problem when after it downloads it goes away and when you run CC update again it gives you a error message.
    Here is what to do.
    1) turn on View Hidden files, via control pannel/folder options.
    2) navigate to c:User/"youaccount"/AppData/Local/Temp
    3) locate & Run - CommandCenterSetup application
    4) This will make a new folder in Temp file called "IXP000.TMP"
    5) open that folder.
    6) Run Command Center 1.28SP1
    7) setup should run and install the new command center as well as a firmware update which is for the webcam.
    Area-51 M15X: T8100: 8800GTX: 4GB Ram: 120 GB HD


  10. #10
    Notebook Deity
    Join Date
    Aug 2008
    Location
    India
    Posts
    1,184
    Rep Power
    20

    Default Re: Command center update

    EVERYONE WHO HAS 64BIT VISTA AND ENHANCED COMMAND CENTER, DO NOT INSTALL THIS NEW COMMAND CENTER. I WILL HAVE A LOOK AT IT TODAY AND SHARE MY VIEWS ON ITS 64BIT SUPPORT.
    Alienware Area-51 m15x
    Intel Core 2 Duo T9300 2.5GHz | 15.4" WXGA LCD | NVIDIA GeForce 8700m GT | Vista Ultimate 64-Bit
    Crucial 4GB DDR2 800MHZ - 2x2048MB | 120GB | PC Mark: Vista 32Bit: 3799 , Vista 64Bit: 4097

    Running Vista x64 on m15x , Running Vista x64 on m17x , AlienFX Tools & Applications

 

 
Page 1 of 18 1234511 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 02:40 AM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.1