*OFFICIAL* Alienware M18x Benchmark Thread - Part 2

[svl7]

New vantage submission, this should be good for the #2 spot right?

Good work Brother Brian!!!

[dr_gin_rain]

Help !! My first time do benchmark.

I don't know why I got so poor score compare to the others P6392

Is that because of core clock and memory clock only run @ 100/150 MHz

Any idea ??

[steviejones133]

Help !! My first time do benchmark.

I don't know why I got so poor score compare to the others P6392

Is that because of core clock and memory clock only run @ 100/150 MHz

Any idea ??

That looks like a normal run / score for your specification to me....

[Mr. Fox]

It just dawned on me this morning that AMD is now in 4th place benching Vantage. Wasn't Shaden's beast in second place before Joker and I displaced his score last night?

Help !! My first time do benchmark.

I don't know why I got so poor score compare to the others P6392

Is that because of core clock and memory clock only run @ 100/150 MHz

Any idea ??

That looks like a normal run / score for your specification to me....

I agree with steviejones... that score is not bad and it's typical of your configuration, bro. Nothing to worry about from what I can see. You may not realize it, but there are a lot of folks that would be very jealous of your P6392 3DMark11 score.

[poohkies]

CPU-Z Validator 3.1

no idea what i'm looking at, just ran the cpu-z software and got the following

[Mr. Fox]

Hi poohkies. CPU-Z Validator is way of documenting your CPU clock speeds. Some folks like to document their core speeds that way and it's a neat tool for doing that.

The down side is that it captures the current state, not the maximum state, which in the case of what you captured is an energy saving speed step. That is why the clock speeds are so low. To capture the maximum speed of your CPU with this program you would need to either disable C-states or run a single-threaded app that loads the CPU enough to reach its peak clock speeds and run the validation while the CPU speed is peaked.

[poohkies]

no problems, thanks for the update Mr. Fox will work on it more

[Mr. Fox]

Now try booting 48x.

If you guys want to get numbers like i have you are going to have to do more than open a window...LOL

Well... this bad boy boots at 48x and idles at 65°C... CPU-Z Validator 3.1

Freq : 4800.33 MHz (100.01 * 48)


Going to have to get the temps under control before I can use 48x, LOL.

[Aikimox]

Well... this bad boy boots at 48x and idles at 65°C... CPU-Z Validator 3.1

Going to have to get the temps under control before I can use 48x, LOL.

Wowzers! Great job Mr Fox! Now we have a solid group of benchers gone past 4.8Ghz! Hopefully, I can join you soon, my room temp and lack of any extra cooling at the moment doesn't allow it... Even at 45x I'm hitting 90C+ in Prime.

[johnksss]

Well... this bad boy boots at 48x and idles at 65°C... CPU-Z Validator 3.1

Freq : 4800.33 MHz (100.01 * 48)


Going to have to get the temps under control before I can use 48x, LOL.

Very nice. Now add 5 flex and try 49x. If you can't get it to work, then turn HT off.

Wowzers! Great job Mr Fox! Now we have a solid group of benchers gone past 4.8Ghz! Hopefully, I can join you soon, my room temp and lack of any extra cooling at the moment doesn't allow it... Even at 45x I'm hitting 90C+ in Prime.

We are not benching this right now...Only trying to find the chips max ghz. Then fine tuning can start after that.