How to pinmod and further overclock the M11x R1 (SLG= Hardmod only)

[DavyGT]

you may have to give them more info about the application thats being used.

at least thats what the lady i emailed with told me. she said i would need to contact the manufacture of the product that the chip was used in to get more info.

Would troubleshooting count? We need more information about the pins or else it's pretty much blind mod at this point.

[bavman]

Well i got another response form their customer support saying that the, "SLG 8SP556V does not support TME function". Is it possible they lock it some other way?

[DavyGT]

Well i got another response form their customer support saying that the, "SLG 8SP556V does not support TME function". Is it possible they lock it some other way?

Not that I can see. That's why I wanted more datasheets.
Can you open SetFSB and navigate to the "Diagnosis" tab, then select the very last PLL, "PLL Diagnosis" and then take a screenshot? I haven't seen the SetFSB page for the SLG in a while.

[bavman]

Like this?

[DavyGT]

Like this?

Oops, I forgot to add that you have to press "Get FSB" then screenshot. My bad.

[bavman]

According to byte 9 its locked if it goes by the same thing as the other pll, i also tried to change some stuff you had in the guide for the other pll but it wouldnt let me

[bavman]

I contacted the guy who wrote setfsb and he said: "SLG8SP556V does not have the function that changes FSB with SetFSB". Maybe theres no luck for 1/2 the m11x users then.

[DavyGT]

I contacted the guy who wrote setfsb and he said: "SLG8SP556V does not have the function that changes FSB with SetFSB". Maybe theres no luck for 1/2 the m11x users then.

If abo says it can't do it, it can't do it.

There is still the FSLx mod for the SLG but it's unproven, untested, inflexible (being stuck at 333mhz) and stability is not guaranteed.

[bavman]

Well assuming it does work that still puts ram at 1100mhz 6/6/6, which wouldnt be stable. I might be stable with that hyperx ram with cas7 @ 1333, but its still a long shot.

[DavyGT]

Well assuming it does work that still puts ram at 1100mhz 6/6/6, which wouldnt be stable. I might be stable with that hyperx ram with cas7 @ 1333, but its still a long shot.

The RAM will be running at 1000mhz ((333 x 1.5) x2) if Overclock mode is enabled, in theory.

Without Overclock mode, it will be running at 1333mhz ((333 x 2) x 2), pretty much a pure FSLx mod.

HyperX 1333 RAM has been tested by DR650SE but only at CAS6.