Overclock - Acer 7738G PIN MODE

[przem997]

Hello.

I'm make pin mode, hardware:
Acer Aspire 7738G
Intel Core 2 Duo P8700
1066 Bus, (266)
ICS 9LPRS365BKL
RAM: 4GB 1333 + 2GB 1066

Acer Support: Acer Aspire 7738G Notebook Specifications

I make pin mode
I cut oryginal path to pin11.

From 11 pin i put resistor 5k, 10k, 20k, 30, 50, 70, 90k to ground but still I have logic 1.
When is resistor 5k voltage is 0.24 in 11pin but fetfsb have still logic 1.
Screenshot shows it's status on register 9 bit 6, shown as 65h=1100101(binary) bit 6=1, meaning no overclocking

What wrong make i?

Tutorial from I do:
EN:
PLL Pinmod Overclocking Methods and Examples
PL:
Podkrêcanie CPU Compal FL90 - dla odwa¿nych - Forum Notebookcheck.pl
RU:
Ðàçãîí ïðîöåññîðà - 22 còðàíèöà

[przem997]

i make it!



my tutorial

[triturbo]

Congrats, that's quite of an overclock Is it stable?

[przem997]

do you watch 3 movies? In movies I say: very stable work and testet with OCCT...

[triturbo]

Sorry, crappy connection here It barely loads the forum, let alone clips. Anyway, congrats again.

[User Retired 2]

do you watch 3 movies? In movies I say: very stable work and testet with OCCT...

Great that you've done the movies, but I think it would help if you outlined in a step-by-step fashion exactly what was necessary to get TME unlocked. From the movies it sounds like you simply attached a 2k-10k resistor to the PLL pin 11 (TME) and GND.

If you slow down your RAM timings with SPDTool/Thaiphoon Burner and increase your voltage in Throttlestop (and if necessary, a +0.1V or +0.2V CPU pinmod per BSEL Mod on a socket P explained with photos ), then I believe you could overclock further.