1810tray

[varvar]

Dear Inteks, I've used your 1810tray v.46 under Win7. Unfortunately I have to change it to win XP.
All available versions do not start with error message "Init error 0xc0000135". Nothing written to log file.
I've tried v.43 v.52 v.53 Could you give me link to download version working on XP?

I've read that it was version 11.
I pray for it. This fan make me crazy.

I found solution for my problem. I was just necessary to install .NET 2.0

Sorry for disturbing you.

[junk1]

Will 1810tray work on a TimelineX 1830TZ? Thanks!

[Ryssen12]

Is it possible to make undervoltage work in Aspire 7745G,When I check with Cpu-Z the voltage is grayed out.

[LaBelleVie84]

Hey guys,

im sorry if this sounds like a dumb question but ive been trying to get 1810 tray to run on my computer. i have win 7 64bit. if i download the zip file and click the 1810tray.exe nothing seems to happen. if i upack 1810tray.exe to desktop the symbol appears, but then again if i click the symbol it says Status error DLL_not found. i really dont know how to fix this and a word of advice would be greatly appreciated.

[unentschieden]

hey guys

on my 1810 I have a problem with the fan control: sometimes even though the tray says it's in "very high" mode the fan is only in "high mode" when it's switching automatically. When I set it on "very high" manually it's definitely faster/louder.

Also when reaching around 70°C the fan seems to turn out for a monent to turn on again afterwards (then I think on very high).

Has anyone else encountered this problem?

[Partykatze]

Hi everybody,

would it be possible with this tool to enter a percentage when the battery of my Acer Aspire 1810tz is to be charged?

As soon as I connect it to the power the battery is being charged even if there are 99 % left. At my old Laptop (Dell Inspiron) it was only charged when it was below 90 or 95 %.

I'm sorry if this is a stupid question, I hope to get an answer anyways ;-)

[Livesms]

Hello!
I've just tried 1810tray after using SmartFan 1.17 and have some trouble with device list - it is empty, so I'm not able to control (enable/disable) wireless\webcam\ethernet adapter.
Is there any way to solve this problem? any way "to fill my device list" ?

[inteks]

Hello!
I've just tried 1810tray after using SmartFan 1.17 and have some trouble with device list - it is empty, so I'm not able to control (enable/disable) wireless\webcam\ethernet adapter.
Is there any way to solve this problem? any way "to fill my device list" ?

go into ooptions and add (rightmouseclick) the devices you want to control...

[sinthemau]

Hi inteks,

I have a 1810TZ with SU4100 and upgraded to 0.53.

Is it correct to set TjMax to 100°C or I have to keep at 105°C?

What's correct to have the right T reading?

This point is not clear to me. For the other points program is really fantastic...thanks again for the great work!


bye

[simple_mind]

First, thanks for all the other developers and testers here for making such a nice little program and explaining how to use and modify it!

I've experimented using 1810tray on an Acer TravelMate Timeline X 8572 (Phoenix BIOS 4.0) and this is a warning for other users that the program in the original version (Extensa settings?) seems to work but all it does is stopping the fan completely. So after looking into the problem and spying on my BIOS I got the program to work well using the following settings instead which are specific for the Timeline 8572:

Hexcodes DC: 0xBB, 0x86, 0x29, 0x80, 0xBE, 0xB2, 0x00
Hexcodes AC: 0x18, 0x29, 0xC7, 0x80, 0xBE, 0xB2, 0x00
Port: 0x55

Using these parameters I can't hear the fan of my Acer (only the hard drive) until it reaches the 0xB2 stage which it only does when I test out the limits of the CPU.

Of cause, I can't guarantee there are no mistakes - be careful.