1810tray

[alexx86]

I also got the same problem in w7 64.

[inteks]

I dont understand, either smartfan or 1810tray the "fan mode: stop" initially doesnt work. It doesnt switch off. I have to switch manually to extremely low fan mode and then to either auto or scheme mode and give control to the program and then it works.

i am working on it.

because of windows7 x64 . . . i cant help you. i dont have x64 to test it.
the code is in c# .net so that should not be the problem.

maybe you need a speciale version of the devcon.exe or winio.dll/sys.
i dont know

[inteks]

new version uploaded, see first post

[dart22]

Has anyone tried ths app on other timelines 3810 and so on ?

[der_mali]

I did some gaming and believe that I've seen 1810tray switching back from "ultra high" to "high" while the fan speed is actually slower at "ultra high" than at "high"

Edit:
And "high" is slower than "slow"
(I checked in AC mode)

[inteks]

I did some gaming and believe that I've seen 1810tray switching back from "ultra high" to "high" while the fan speed is actually slower at "ultra high" than at "high".

on dc or on AC ? should i change the hexcodes for "high" and "ultrahigh" ??

btw.
i found the same for DC hexcodes. the code for "slow" was much to fast. (this is fixed in vers.4)
the AC codes will i try to fix in next version

[der_mali]

on dc or on AC ? should i change the hexcodes for "high" and "ultrahigh" ??

I checked it in AC mode. Please post which hex codes you are using for which speed. BTW the medium mode is barely different to the next slower mode so it should be left out completely.

[der_mali]

I've rechecked the AC hex codes. It seems that some are not 100% reliable. "high" is not always the same speed. This is what is left from the codes I noted when testing in SmartFan:

A7(-120%) extr slow
9E(-46%)-(-35%) very slow
8A(0%)-(8%) slow
13(17%)-(25%) very high
1C(19%)-(27%) supreme

'medium'(1Ah) is marginally faster than 'slow' and high(03h) varies depending on temperature by itself it seems.

[dasfool]

Any reason this won't work on a USA 1410 model? Maybe I should just try it.

[inteks]

update 5:
-fixed ac speeds
-direct fanspeed control added
-direct "power option" added
-1152x648 added (dtds.reg included)

download see 1. post

have fun
inteks