Acer Aspire Timeline Owner's Lounge

[runtohell121]

anyone got a clue what's the difference between the BIOS version 1.30 and 2.30 (OE) for Acer 4810t?

[1dell2acer]

Only Olimpic Logo during the boot

[runtohell121]

I'm wondering why is the DDR3 RAM running at 800 MHz instead of 1066 MHz on the Acer Aspire 4810 Timeline?

[nightfox91]

I'm wondering why is the DDR3 RAM running at 800 MHz instead of 1066 MHz on the Acer Aspire 4810 Timeline?

The speed can only go as high as the FSB (800MHz) for the culv processor.

[runtohell121]

The speed can only go as high as the FSB (800MHz) for the culv processor.

Oh I see, but is there anyway to try and unlock it to be faster? seems kind of pointless to have DDR3 ram without the performance of a DDR3 ram

[hardc0re]

I installed fresh Windows 7', installed newest GS 45 drivers from Intel and I am still having same problem. I cannot work only on integrated video adapter, because it doesnt detect me secondary display.

If you have the dual-graphics (ATI + Intel) version, then you only need to install the ATI graphics driver for your model. Do not install the Intel Graphics driver package.

The ATI Graphics driver package for dual-graphics systems already includes the Intel graphics driver.

[maxim_fr]

Anyone with 3G-enabled Timeline AND Windows7 x64 here? It seems to me that Acer's Launch manager for x64 Win7 have major problems with wifi/3g sensor-LED-button _when_ 3G modem is installed. It actually unable to switch between wifi/3g modes. But when Launch Manager software is not installed, everything works just fine. Also it's works fine in Acer's "native" 32bit VistaHP.

So, my questions are:
- anyone experience the same problem? if so, which modem card and Launch manager version you are using?
- is there a way to tune Launch Manager so that it will not take control over one particular button?

P.S. I've tried to use the following modems:
- Option GTM380
- Option GTM382
in my Timeline model AS3810TG-354G50n.

[jaybee83]

Anyone with 3G-enabled Timeline AND Windows7 x64 here? It seems to me that Acer's Launch manager for x64 Win7 have major problems with wifi/3g sensor-LED-button _when_ 3G modem is installed. It actually unable to switch between wifi/3g modes. But when Launch Manager software is not installed, everything works just fine. Also it's works fine in Acer's "native" 32bit VistaHP.

So, my questions are:
- anyone experience the same problem? if so, which modem card and Launch manager version you are using?
- is there a way to tune Launch Manager so that it will not take control over one particular button?

P.S. I've tried to use the following modems:
- Option GTM380
- Option GTM382
in my Timeline model AS3810TG-354G50n.

hey there,

im using a AS3810TG-944G50n Timeline model with an Option GTM382 3G Modem and Acer LaunchManager version 3.0.0.5 installed on Win7 Ultimate x64. So far i havent had any problems at all switching between wifi, 3G, both, or all off. But as far as i know, there IS a possibility to reprogram the touch-buttons to ur liking, just check the first post on the first page of THIS thread! ;-)

cheers

[maxim_fr]

hey there,

im using a AS3810TG-944G50n Timeline model with an Option GTM382 3G Modem and Acer LaunchManager version 3.0.0.5 installed on Win7 Ultimate x64. So far i havent had any problems at all switching between wifi, 3G, both, or all off. But as far as i know, there IS a possibility to reprogram the touch-buttons to ur liking, just check the first post on the first page of THIS thread! ;-)

cheers

Hi,
That's very strange! I have the very similar laptop and the very same modem as well as 64bit Win7 Ultimate, and I've just tried 3.0.0.5 again with no luck So, more questions:
What BIOS version you are using on your 3810?
What firmware version of your GTM382?
What drivers you use for GTM382?

[jaybee83]

Hi,
That's very strange! I have the very similar laptop and the very same modem as well as 64bit Win7 Ultimate, and I've just tried 3.0.0.5 again with no luck So, more questions:
What BIOS version you are using on your 3810?
What firmware version of your GTM382?
What drivers you use for GTM382?

im using BIOS 1.14 (funnily, it was only available for a short time, when u check the download section of the 3810 now, its not there anymore. also question to all of you: u think that the BIOS of the 4810 and 5810 models would be interchangeable? i mean, since all the drivers and programs obviously are....)

using 5.1.30 driver aaaand conceeeerning the firmware.....gotta check first ^^