SetFSB added support for ICS954310 and couple more

[Andy]

You can provide the necessary details to the SetFSB developer, and request him to add the PLL functionality to his software.

[lemigrateur]

tanks Andy
i made a request, lets see..

[lemigrateur]

So here is the answer:

Hi,
I do not have the RTM875N-606-VD datasheet.
Can you obtain the datasheet?

And, I examine the PLL data.

1. start SetFSB.
2. select the clock generator to "RTM875T_587". (not RTM875N-606-VD)
3. click "Diagnosis" button.
4. click "Get FSB" button.
5. click "Capture" button.

Please send "Diagnosis" screenshot of the /setfsb_2_1_82_0/capture folder.


How atthegates did he get the RTM875N-606-VD datasheet for the Acer 5930g ?

[Andy]

Either send him that screen capture in setfsb, or go to Realtek's site and search/request for the PLL datasheet.

[ATG]

....How atthegates did he get the RTM875N-606-VD datasheet for the Acer 5930g ?

I didn't. I do NOT have any datasheets. I just got the PLL code.

[lemigrateur]

ok right now there is a problem to set the fsb of the Acer inspire 5930g because there is what we need:

Hi Olivier-san,

Hmm..., I do not have the RTM875N-606 datasheet.
And, This is different from the setting of usual RTM.
Can you obtain the datasheet?
If it is possible, Could you send me the datasheet?
abo


anyone?

[bigdbag]

Has anyone tried to overclock a SU3500 on an Intel GS45 chipset? I just got the Acer 1410 or the Acer 1810T Timeline, and am very interested in trying to get a bit more juice out of it because flash video performs quite poorly on it. Cheers!

[der_mali]

Has anyone tried to overclock a SU3500 on an Intel GS45 chipset? I just got the Acer 1410 or the Acer 1810T Timeline, and am very interested in trying to get a bit more juice out of it because flash video performs quite poorly on it. Cheers!

TME is enabled, so no overclocking. I'll try to find a hardware solution when I get my 1810t/1810tz, but this will take a while. If someone else wants to try first, search for the pull up resistor connected to pin11 on slg8sp513v, remove it and connect pin11 to ground via 10k resistor. Register settings of slg8sp513v aren't documented in the datasheet but I've found out that they are identical to other clock generators made by Silego. It's best to use slg505yc264bt to over/underclock in finer increments.

[shakennstirred]

so we able to overclock the 8930g yet or at all?

[Keval]

Is it possible to underclock my 6935G?