Seems 6x doesn't overload USB 2.0 ...
Tested my WH10LS30 with Verbatim 6x LTH discs, it was able to reach 6.0x (27,xxx KB/sec) at certain points with ImageBurn. It starts off a 2.8 then increases as it gets further along (inner groove to outer groove?).
Again, just be careful with the USB cable you use. I had a few lying around that wouldn't let the PC properly detect the burner. Took an old Belkin USB 2.0 cable from my printer and it worked better. USB 1.1/2.0 cables are supposed to be universal so there is no visual reference to indicate a cable can handle the higher data rate (except USB 3.0 which are coded blue).
Update: Spoke too soon, had a verify error towards the end of the disc (on LG). Could be the discs, writes at max 2x on the Panasonic connected to ultrabay.
http://club.myce.com/f142/panasonic-...estion-317894/
Ok, must have been the discs since another burned at 2x but also failed to verify with the 6x LTH discs (on the LG). I had one more of the older 2x LTH and that burned/verified just fine (On the LG). Panasonic UJ240 reported 6x LTH max speed was 2x. It burned and verified okay. 2 out of 4 failures, no success at 6x, returning this cake to amazon and ordered some 6x from digistor. Hope that set will be better.